EV Easy Model Q Installation for a Recycling Business, Bang Pa-in, Ayutthaya
EV Easy installed a Model Q charger at a recycling business in Chiang Rak Noi Subdistrict, Bang Pa-in District, Phra Nakhon Si Ayutthaya Province, on 2 September 2569 B.E. The handover photos show the EVeasy-branded unit in a wall-mounted storage cabinet, along with the electrical equipment and charging cable from the same job.
Installation details
Site type: Recycling business
Area: Chiang Rak Noi Subdistrict, Bang Pa-in District, Phra Nakhon Si Ayutthaya Province
Charger: EV Easy Model Q with a 10-metre charging cable
Installation date: 2 September 2569 B.E.
Charging point in a wall-mounted cabinet beside the building
The site photos show a black charger installed inside a storage cabinet on the outside wall of the building, below a window line, with a set of electrical equipment on the left and space below for coiling the charging cable. A conduit run leads from the cabinet along the building wall.
The technicians' list specifies a Circuit 1 installation, a Schneider 40A breaker, an RCD Type B 40A residual current device, Yazaki 10 sq mm cable, wiring run in conduit and grounding work. The post-job report records a cable run of 28 metres, which is specific to this site.
An example for businesses planning an EV charger installation
This project shows how the charger, cable storage cabinet and conduit run are arranged at a real business site. Businesses in Bang Pa-in and the wider Ayutthaya area can use these photos as a reference when talking with the EV Easy team to assess the charging point location, electrical system and cable run for their own project.
Frequently asked questions about this job
Which charger model was used for this job?
An EV Easy Model Q with a 10-metre charging cable, according to the installation team's records, and the EVeasy logo is visible on the unit in the handover photos.
Where was it installed?
At a recycling business in Chiang Rak Noi Subdistrict, Bang Pa-in District, Phra Nakhon Si Ayutthaya Province.
Did the installation include electrical work?
The technicians' records list the charging circuit, electrical equipment, wiring run in conduit, grounding work and a storage cabinet, with photos from the actual site.
I want an EV charger installed for my business in Ayutthaya. How do I get in touch?
Contact EV Easy via LINE @eveasy or call 093-359-2207 and tell us your business type, province, car model, electrical system and preferred installation location so the team can assess the scope of work at your actual site.
Installation details
| Products used in this project | |
|---|---|
| Type of site | Commercial building |
| Installation date | |
| How we work | Site assessed from photos or video before quoting · installed with residual-current protection · system tested with electrical test equipment before handover · on-site usage training |
Every EV Easy installation follows the same process: we check the meter size, main cable and the existing electrical panel to decide whether to connect from the existing panel or use a separate meter for the charger, run cables sized for the charger's current, install a dedicated residual-current breaker for the charging circuit, and test the whole system before handover — see the details on our installation service page
Photos from this installation
Want an installation like this at your home?
Send photos or a video of the installation spot on LINE @eveasy and our team will quote before you decide.





